The Bureau of Meteorology’s outlook issued on 19 November gives a greater than 80 per cent chance of above-average daytime and overnight temperatures across almost all of Australia for December 2026 to February 2027. Prepare your venue’s heat controls before the next busy service, covering workers, outdoor areas and temperature-sensitive stock.
Your venue may have a plan for a quiet night and a plan for a big night. Does it also have a plan for a hot service? A venue heat plan should bring together the people on the line, the guests on the terrace, the refrigeration holding your stock and the response if power or equipment fails. Use it to assign responsibilities and put controls in place before conditions deteriorate, rather than leaving decisions to whoever is on shift.
What the forecasters are saying
The Bureau of Meteorology’s outlook issued on 19 November 2026 gives a greater than 80 per cent chance of above-average daytime and overnight temperatures across almost all of Australia for December 2026 to February 2027. It also shows an increased chance of unusually warm days and nights across much of the country. These are seasonal probabilities, not a forecast that every location will be hot every day.
Rainfall signals vary by region. Above-average rainfall is likely in parts of southern Queensland and north-eastern New South Wales along and west of the Divide, while below-average rainfall is likely across much of the north and west, and Tasmania. Many other areas have no clear signal towards a wetter or drier summer.
El Niño is one influence, not a forecast for your venue. The Bureau’s monitoring summary dated 10 November describes a strong to very strong event, with models forecasting tropical Pacific warming to peak in November or December and remain above El Niño thresholds into autumn 2027. The Bureau cautions that a strong El Niño signal does not necessarily mean strong temperature or rainfall impacts in Australia.
For venue planning, review overnight ventilation, cooling and refrigeration performance rather than assuming conditions will be cooler by the next shift. Use the seasonal outlook to prepare, then use local forecasts and heatwave warnings to guide day-to-day decisions.
Heat is now a front-line WHS risk
On 5 November 2026, Safe Work Australia announced development of a national strategy on the WHS impacts of climate change. Its announcement says the 2026 Best Practice Review identified rising temperatures and more frequent heatwaves as the most immediate WHS risks associated with a changing climate.
Safe Work Australia’s working-in-heat guidance explains that a single stop-work temperature cannot account for humidity, air movement, the intensity and duration of work, or individual factors. It identifies commercial kitchens and laundries as indoor heat-risk settings and lists workers under 25, older workers, pregnant workers, people with relevant illness and workers who are not acclimatised among those at higher risk.
The guidance says not to rely on acclimatisation as a control measure: responses vary between people, and acclimatisation programs should be developed in consultation with a professional such as an occupational hygienist. New starters and people returning after time away need attention, but a written plan or an experienced team does not replace effective controls.
A heat plan needs working controls, not just a temperature trigger.
Kitchens and laundries first
Safe Work Australia’s risk-control guidance says to aim first to eliminate hazards, then consider substitution, isolation and engineering controls, with administrative controls and suitable personal protective equipment addressing remaining risks. Under the model WHS framework, businesses must ensure health and safety so far as is reasonably practicable, consult affected workers and coordinate with other relevant duty holders. Check the applicable WHS or OHS requirements and regulator guidance in your jurisdiction; Safe Work Australia develops national policy and is not the workplace regulator.
For a kitchen, practical options include having extraction and make-up air checked, reducing exposure to heat sources and moving physically demanding preparation to cooler periods where feasible. Provide accessible cool drinking water and suitable cool rest areas, and review work pace, breaks and supervision with the team. Choose controls for the actual heat exposure and check that they work; do not treat rotation or hydration alone as sufficient.
Include first-aid arrangements and escalation in the briefing. Safe Work Australia’s heat-illness first-aid guidance says to call an ambulance immediately if heat exhaustion or heat stroke is suspected; call 000 and follow the operator’s instructions.
Terraces and guests
Include outdoor service areas in the venue’s heat assessment rather than relying on the forecast air temperature alone. Consider shade, radiant heat, humidity, air movement, the physical demands of service and access to water and cool rest areas when deciding whether terrace work can continue safely.
As operational planning measures, agree who can reduce or close outdoor service, relocate bookings or reschedule tasks when controls are inadequate. Review shade and cooling options for the site rather than assuming a fan, misting system or reduced menu makes conditions safe. Make drinking water readily available and communicate service changes to guests.
Cold rooms, power and food safety
Review refrigeration maintenance, door management, temperature monitoring and the response to equipment or power failure before busy services. Have your refrigeration contractor assess plant performance and maintenance needs; do not assume a unit will hold safe food temperatures because it appeared adequate last summer.
For Australian food businesses, FSANZ’s temperature-control requirements explain that potentially hazardous food must generally be received, stored, displayed and transported at 5°C or colder, or 60°C or hotter, unless the business can demonstrate a safe alternative system. Preparation time should be kept as short as possible.
For refrigerated ready-to-eat potentially hazardous food, the 2-hour/4-hour guidance in Safe Food Australia uses cumulative time between 5°C and 60°C:
-
Less than 2 hours: Use the food or return it to refrigeration for later use.
-
From 2 hours to less than 4 hours: Use the food before the 4-hour limit; do not return it to refrigeration for later use.
-
4 hours or longer: Discard the food.
Add together relevant periods during preparation, storage, transport and display; returning food to refrigeration does not reset the accumulated time. The guidance also warns that some foods need shorter limits in hotter conditions. Do not use the rule as blanket permission to hold every food for 4 hours or to salvage stock with an unknown temperature history.
Cooling cooked potentially hazardous food is a separate process. The standard requirements are to cool it from 60°C to 21°C within 2 hours, then from 21°C to 5°C within a further 4 hours, unless a safe alternative system can be demonstrated.
For a power or refrigeration failure, base stock decisions on the food involved and its recorded time and temperature history, with advice from your food-safety supervisor or relevant enforcement authority where needed. Do not assume cooking is an appropriate rescue step for food whose safety cannot be established.
Writing the venue heat plan
-
Set risk-based review and action triggers. Name the responsible person on each shift. Use forecasts and warnings alongside actual workplace conditions, workload, individual risk factors and signs that controls are failing; do not rely on one outdoor temperature.
-
Check the plant and controls. Arrange appropriate refrigeration, air-conditioning and ventilation checks, and confirm that identified faults are addressed. Check access to drinking water, cool rest areas and first-aid support.
-
Adjust work to reduce exposure. Consult workers about moving demanding tasks to cooler periods, reducing heat-generating work where feasible, and adjusting pace, breaks and staffing. Stop or reschedule tasks when risks cannot be adequately controlled.
-
Support workers at higher risk. Brief new and returning workers, check understanding and monitor for heat-related illness. Seek professional advice on acclimatisation programs rather than relying on acclimatisation as the control.
-
Set terrace rules. Decide who can relocate bookings, reduce service or close outdoor areas when conditions and controls require it. Include the safety of staff servicing those areas in the decision.
-
Plan for a power or refrigeration failure. Keep food-temperature and time records, contractor contacts and a written stock-decision process. Distinguish refrigerated-food time limits from cooked-food cooling requirements, and discard food when safety cannot be established.
These are seasonal outlooks, not guarantees of conditions on a particular day. Review local forecasts and heatwave warnings, and adjust the venue’s heat controls as conditions change.
At Alto Cibum, heat load is one of the first things we look at when we design or refit a commercial kitchen, because ventilation, equipment placement and refrigeration choices decide how a room performs in February. If your kitchen or terrace struggled last summer, we can help you work out which fixes are operational and which belong in the design.
This article provides general operational information, not a site-specific WHS/OHS assessment or food-safety compliance plan. Confirm applicable requirements and controls with appropriately qualified advisers and the relevant authorities.
Robert Clifford, Managing Director, Alto Cibum
Review Your Venue’s Summer Readiness
Alto Cibum can help review kitchen ventilation, equipment placement, service flows and terrace operating arrangements. Identify practical operational and design improvements alongside advice from your WHS/OHS, refrigeration and food-safety specialists.
Discuss Your Venue’s Summer ReadinessKeep Reading
Diversifying Your Offering in Food
Explore developing event capabilities for private parties, corporate events and weddings.
The Street Social Docklands
Consider how event concepts, guest flow, programming and operational planning work together.
The Six-Week Window: Planning Festive Trading With Last December’s Spending Data
Review festive bookings, package pricing, staffing and capacity using your venue’s own trading data.
Stay up to date with Alto Cibum
Practical insights on hospitality strategy, operations, trends and design. Follow Alto Cibum on LinkedIn or subscribe to our fortnightly newsletter.